XFL-W1325Styrofoam engraving machineApply to styrofoam mold , Large-scale casting molds, glass fiber reinforced plastic wooden molds, cast wooden molds, foam, substitute wood, resin products, clay models, five-axis processing of various non-metallic molds.
XFL-W1325< /span>Features of Styrofoam engraving machine:
1, Taiwan’s new generation control system, Japan’s Yaskawa servo drive,9.0kwHigh-speed variable frequency air-cooled spindle.
2, 8 Capacity bucket hat type automatic tool change tool magazine, engraving speed up to1200mm/min< /span>.
3, full screw drive, French Schneider electrical components are more accurate and more stable.
|
XFL-W1325Styrofoam engraving machine |
|||
|
Work schedule |
1300x2500x500mm |
Transmitter |
Taiwan Delta inverter< /span> |
|
Processing accuracy |
±0.05MM |
rack |
German Henry1.5Mold-density oblique rack |
|
Repeat positioning accuracy |
0.05MM |
Guide |
Taiwan Shanghai Bank25Square linear guide |
|
Drive motor |
Japan Yaskawa Servo Drive span> |
Screw |
TaiwanTBI2505Ball screw |
|
Control system |
Taiwan new generation system span> |
Bearing |
SwedenSKFPrecision matched bearings |
|
Spindle power |
9.0KWHigh-speed variable beard air-cooled spindle |
Power |
AC380V/50~60HZ |
|
Transmission mode |
X,Y,ZShaft ball screw |
electric cabinet |
fully enclosed free-standing electric cabinet |
|
Mesa structure |
TType groove table |
Electrical components |
French Schneider Electrical Components span> |
|
Lubrication system |
Automatic fuel pump |
Wiring standard |
CE, with line mark |
|
Idle speed |
0-25000MM/MIN |
body structure |
cast iron body |
|
Processing speed |
0-12000MM/MIN |
Appearance size |
About2100x3100×2800MM |
|
Spindle speed |
0-18000R/MIN |
Net weight |
About4.5ton |
|
Command format |
G-CODE,PLT,MMG,UG,ENG,HPGLetc |
Tool library format |
Hot hat type automatic tool change< /span> |
|
tool magazine capacity |
8put |
After-sales service |
Warranty1year(Consumables not included) |
Dongguan New FarahWarranty and after-sales service
The warranty period is from the date of use12within months(except for fragile and consumables ), lifetime maintenance. Under normal use, if the equipment provided by the supplier has quality problems during the warranty period, the supplier shall repair and replace it free of charge. During the warranty period, due to the improper use of the equipment by the buyer, the supplier must also repair and replace the equipment and charge for the related equipment.
During the warranty period, when there is a problem with the equipment, the supplier must report to 2Respond within hours. The supplier’s technicians will rush to the site for maintenance within 24 hours.
On-site installation, commissioning, training and acceptance
In the on-site installation process, the buyer will send on-site installers to cooperate with the supplier.
After the equipment arrives at the place designated by the buyer’s factory2The supplier will complete the installation and commissioning within days.